aguess Posted September 29, 2010 Share Posted September 29, 2010 So my remore pro keeps a fine screen of bubbles in my tank at all times, and they seems to stick to everything. NO MORE! Just looking around for a mag-drive 3 compatible pre-skimmer box for a remora pro. (The Mag3 box is wider than the maxijet 1200) Local stores want $58 for one, ebay is ~$40 :( I got plenty of coral to trade for one, or cash i suppose. Thanks! Amazon link to it here Quote Link to comment Share on other sites More sharing options...
reefnjunkie Posted September 29, 2010 Share Posted September 29, 2010 I got one, make me a fair offer-and how to get it to ya- I used it on my Remora C I think its called-I was going to sell it with the skimmer Sorry for all the edits-but I would prefer cash Quote Link to comment Share on other sites More sharing options...
reefnjunkie Posted September 29, 2010 Share Posted September 29, 2010 OK, let me add one last thing-I ran the maxi-jet 1200 so if there is a sepcific one for the mag3 then what I have may not work-it looks identical to the picture and I used it for about 1 month. Its pristine Quote Link to comment Share on other sites More sharing options...
aguess Posted September 30, 2010 Author Share Posted September 30, 2010 sorry, it's a wider box, looks uglier in the tank :\ thanks tho! Quote Link to comment Share on other sites More sharing options...
reefnjunkie Posted September 30, 2010 Share Posted September 30, 2010 I would agree on the ugly part, which I could handle if the thing actually did what is was supposed to- including the skimmer-(laugh) Good luck Quote Link to comment Share on other sites More sharing options...
newfisher Posted September 30, 2010 Share Posted September 30, 2010 Andrew, sell the skimmer and get one that works! I fought the same issues on the reef tank with 2 different Remora set ups. Put it up on RC and it will sell in a day or two. Quote Link to comment Share on other sites More sharing options...
aguess Posted September 30, 2010 Author Share Posted September 30, 2010 I'd like to put something down below in my cabinet, but it's a short corner design. Well, we ARE closing the back patio in this weekend, which would allow me to move the whole equipment setup to the other side of the wall, and fit a good skimmer down there... and expand my crowded mangrove refugium... Quote Link to comment Share on other sites More sharing options...
newfisher Posted September 30, 2010 Share Posted September 30, 2010 What about a "hang on back " style, like the remora, but a larger unit and hang it on the sump? With an ATO and consistant water level there, it shouldnt fluctuate and work well. I have an Eshopps hanging on my sump and it works great. Quote Link to comment Share on other sites More sharing options...
aguess Posted September 30, 2010 Author Share Posted September 30, 2010 I tried putting the remora down below last year, and it was too tall for the cabinet, I couldn't get the cup out. I think that I'll drill a hole in the back of my house, move all of the cabinet equip and skimmer to the back room when we finish it. WTS remora pro, lol Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.